A cooktop that works perfectly well when using one cooking zone, but displays an error when additional zones are switched on, presents an interesting diagnostic challenge.
In this edition of Behind the Repairs, we look at a Franke ceramic cooktop with a progressively worsening fault and an error code that wasn't listed in the available service documentation.
The reported fault
We were asked to investigate a Franke Urban 60 cm ceramic cooktop, model FCE604B1, displaying an ER42 error when multiple cooking zones were operating.
Interestingly, the customer reported that the problem had developed gradually over approximately a year.
Initially, three cooking zones could be operated simultaneously without encountering the fault. More recently, this had reduced to just two.
The cooktop was still capable of heating, but its ability to operate multiple zones had progressively deteriorated.
Our investigation
During our initial inspection, we were able to reproduce the reported fault.
When operating a single cooking zone, the cooktop worked without displaying the error. However, operating multiple zones caused the ER42 error to appear.
One of the challenges with this particular repair was that ER42 was not listed in the service manual available to us.
While manufacturer documentation is an important diagnostic resource, it doesn't always cover every fault an appliance may develop.
In these situations, understanding the appliance's operation and observing its behaviour become particularly important.
Based on the symptoms, we suspected that the cooktop's control system was responding to a perceived excessive current draw.
The next step was to investigate whether there was a problem with the heating elements themselves.
After safely isolating and opening the cooktop, we measured the resistance of the heating elements. The recorded measurements were approximately 27 and 40 ohms, consistent with the expected operation of the elements tested.
With no apparent fault identified in the heating elements, our investigation turned towards the main electronic control board.
We recommended replacing the board, with further functional testing to follow.
Why electronic control faults can be difficult to diagnose
Modern ceramic cooktops are relatively simple in how they produce heat. Electrical heating elements beneath the glass surface generate the heat used for cooking.
However, managing those elements is considerably more complex.
Electronic control systems are responsible for interpreting user inputs, controlling heating power and, depending on the appliance's design, monitoring operating conditions.
A fault within the control system can therefore affect the operation of otherwise functional heating elements.
This can explain why an appliance may behave normally under certain conditions but develop a fault when its operating demands increase.
In this case, the relationship between the number of active cooking zones and the appearance of the error was an important diagnostic clue.
The repair
Following the initial assessment, a replacement main control board was supplied by Franke.
We returned to install the replacement board and carry out functional testing of the cooktop.
The heating elements and their controls were tested, and the ER42 error was no longer present.
The cooktop passed its operational checks and was returned to service.
While the successful repair supported our diagnosis of a control board fault, we did not investigate the precise electronic failure within the original board.
What appliance owners can learn
Intermittent faults are worth reporting
When an appliance develops an intermittent fault, it can be tempting to continue using it as long as it remains partially functional.
However, changes in its behaviour over time can provide valuable information for a technician.
In this case, knowing that the cooktop had progressively become less capable of operating multiple zones was useful in understanding the nature of the problem.
When reporting a cooktop fault, useful information includes:
- Which cooking zones are affected.
- Whether the fault occurs when using one or multiple zones.
- Whether the fault appears immediately or after heating for a period.
- Any error codes displayed.
- Whether the problem has become more frequent over time.
- A video showing the fault occurring, if it can be captured safely.
Video recordings can be particularly helpful when investigating intermittent faults. Where possible, capturing the appliance's behaviour leading up to the fault, rather than just the resulting error code, can provide valuable diagnostic information.
Do not deliberately reproduce a fault if doing so could be unsafe.
The more information we have about the circumstances surrounding a fault, the better we can direct our initial investigation.
An error code is only part of the picture
An error code is one piece of diagnostic information, rather than a complete diagnosis.
Its meaning can vary between manufacturers, models and electronic control systems.
Even when an error code is not documented, systematic testing and an understanding of the appliance's operation can help identify the underlying problem.
A faulty cooktop doesn't necessarily need replacing
A cooktop may contain several perfectly functional heating elements and other components, despite being unable to operate correctly.
Where suitable replacement parts are available, repairing an electronic control fault can return the entire appliance to service without replacing the cooktop.
If your cooktop is repeatedly displaying errors or behaving unexpectedly, discontinue use and arrange for it to be professionally assessed. Internal inspection and electrical testing should only be carried out by a suitably qualified technician.
Cooktop repairs in Canberra
At The Ginger Beard Repair Service, we investigate mechanical and electronic appliance faults, including problems that aren't immediately explained by an error code.
Find out more about our Franke appliance repair services or our general stove, oven and cooktop repairs in Canberra and the surrounding region.
This article describes an actual repair carried out by The Ginger Beard Repair Service. Appliances displaying similar symptoms may have different underlying faults.

