Haier Repairs in Canberra
In-home repairs for Haier washing machines, washer-dryers, dryers, dishwashers and fridges across Canberra and Queanbeyan, from an authorised Haier service agent.
Need a repair today?Need a same-day repair? Call us between 8:00–8:30am, Monday to Friday, to check availability.Same-day spots are limited and usually filled by 8:30am. Call us to check whether anything has opened up.
Still under warranty? Contact Haier first — here’s why.
Authorised Service Agent
Authorised for Haier
Still under warranty
Contact Haier first. They check your warranty and issue the work order to a local service agent — ask for GBRS and it comes to us. Booking and paying us directly for a repair Haier would have covered means paying for something you were entitled to under warranty.
Out of warranty
Book with us directly. You get the same technicians, genuine parts and manufacturer information as a warranty job, at our standard published rates.
Book a RepairWhat being authorised means for your repair
- Genuine parts ordered directly from Haier
- Access to Haier’s service manuals
- Warranty work orders issued to us by Haier
What We Repair
The Haier Appliances We Repair
We repair Haier appliances in your home across Canberra and Queanbeyan:
From Our Job Records
What We’ve Found Diagnosing Haier Error Codes
These are codes from our own Haier jobs around Canberra and what we found when diagnosing them. The same code can have more than one cause — our two F30 dishwashers had completely different faults — so diagnosis always comes first. If you have a code, tell us when you book — it helps us prepare for the visit.
| Code | Appliance | What we found |
|---|---|---|
| F30 | Dishwashers, including HDW15V2B2 and HDW13V1W1 | A water leak or drainage fault. One had a completely blocked drainage spigot; another had a leaking diverter hose that appeared to have been chewed by mice. |
| FC1 | Washing machines, including HWF90BW1 and HWF85BW1 | A persistent fault after checking the connections. Our diagnosis pointed to the power and motor-control modules in one machine, and the motor board and motor in another. |
| F34 | HDHP90AN1 heat-pump dryer | A damaged, burnt heater box, with lint build-up suspected as a contributor. Replacing the heater box restored heating. |
| FD | HWDX1590CTB1 washer-dryer | A tripped thermal safety switch at the start of drying; the heating element and thermostat tested correctly. |
| F32 | HDC80E1 condenser dryer | The motor, capacitor, wiring and heater tested fine; the fault traced back to the main and display boards. |
From Our Job Notes
Haier Repairs We’ve Carried Out
A few real Haier jobs from around Canberra — what the customer noticed, what was actually wrong, and how it was fixed.
Haier dishwasher, Murrumbateman
What the customer saw: The dishwasher displayed F30.
What we found: Water was leaking from the hose between the sump and upper spray arm. The hose appeared to have been chewed by mice.
What we did: Replaced the diverter hose and clamps, then tested washing, heating and drainage. No leaks were detected.
Haier front-load washing machine, Canberra City
What the customer saw: The retaining spring around the door seal had come off.
What we found: The spring needed to be refitted.
What we did: Refitted it and tested filling, washing, draining and spinning. The washer passed testing without leaks.
Haier heat-pump dryer, Kambah
What the customer saw: F34 appeared, and smoke came out when the door was opened.
What we found: The heater box was damaged and burnt at a relay. The technician suspected lint buildup had contributed.
What we did: Removed accessible lint, replaced the heater box and tested operation and heating. The dryer passed testing; the customer was asked to monitor it.
Haier washer-dryer, Wamboin
What the customer saw: FD appeared at the start of drying, while washing still worked.
What we found: The thermal safety switch had tripped. The heating element and thermostat tested correctly.
What we did: Reset the safety switch and ran drying for 20 minutes without the fault returning, and recommended further work if the fault came back.
Haier French-door refrigerator, Monash
What the customer saw: The display stopped working.
What we found: Wires had broken where the harness passed through the door hinge.
What we did: Soldered and insulated the wires, repositioning the harness so the repaired joints were away from the hinge. The display and buttons worked again.
Haier quad-door refrigerator, Michelago
What the customer saw: The water dispenser continued dripping after use.
What we found: The dispenser paddle or the hose through the door was suspected.
What we did: Replaced the paddle and primed the filter. No dripping or leaks appeared during testing; the customer was asked to monitor it.
Examples from individual jobs. Similar symptoms can have different causes; diagnosis confirms the repair required.
How It Works
What Happens at the Visit
Book a time
Choose a slot online and save 10% on the Service Call Fee. Tell us the model and what the appliance is doing. Under warranty? Contact Haier first.
Know when we're coming
Confirmation email, a reminder the day before, a text when we're one job away, then live tracking on the way.
Diagnose the fault
The technician tests the appliance, finds the cause and explains the cost before any repair work starts.
Repair or order parts
Many faults are finished on the spot. If a part is needed we order it and book a return visit — no second Service Call Fee.
Test and follow up
We test the appliance before closing the job, then follow up two weeks later to confirm all is well.
Who Turns Up
Local Technicians You Can Trust
GBRS has been repairing appliances for Canberra homes since 2015, from a base in Fyshwick. The person at your door is one of our own technicians — not a subcontractor you've never heard of.
The people who turn up
Qualified, and kept current
Between them, our technicians hold engineering degrees, electronics experience, electrical qualifications and several Cert IV qualifications. We stay current with Haier’s service manuals as new models arrive, and being an authorised Haier agent means we can raise a repair with Haier directly when it’s needed.
Reviews we don't get to write
Every completed GBRS job triggers a feedback request through ServiceM8, and this feed is what comes back — across every appliance type and brand we repair. We don't write the reviews, pick which ones appear or take any down.
What customers say about our washer and dryer repairs
From our Google reviews, in the customers’ own words.
★★★★★“Our washing machine was leaking so we booked an appointment to have it looked at. Benjamin was great! He fixed the issue quickly and the cost was very reasonable. Highly recommend!”
★★★★★“Great service. The issue was detected with our dryer and they promptly ordered the parts in to get it fixed right away for us. Charli Rowley was the tech on site and we could not fault them. Thanks team!”
Book a Haier Repair
Out of warranty? Book online to pick a time and save 10% on the Service Call Fee. Still under warranty? Contact Haier and ask for GBRS.
In short: booked online, a repair visit starts at $235 including GST: the $135 Service Call Fee plus $100 for the first 30 minutes of labour. After that, labour is $16.67 per 5 minutes, capped at 2.5 hours per appliance, and any parts are quoted before they’re ordered. Pay in person by card at the end of the visit and you save a further 2.5% on labour.
Book a RepairCall 02 6190 0457